KAJ VGRAJUJEMO

Predelava na plin CAR GAS

Spoštovani  bodoči uporabniki avtoplina,

glede razprav po forumih  kakšno kvaliteto vgrajujemo v zakupljenih kuponih podjetja FEMITEC  smo se odločili, da Vam predstavimo  glavne  komponente (krmilne enote, injektorje in reduktorje) katere vgrajujemo ,da ne bo nadaljnjih dilem oz . morebitnih dvomov ali vprašanj okrog tega.

Zaradi istovetnosti informacij smo opise ohranili v originalu kot jih je določil proizvajalec.

Femitec_MA-V4_ECU_200ECU  FEMITEC

FEMITEC MA-V4 OBD is an innovative controller with OBD connection. Through the external OBD adapter, the controller receives and process the petrol ECU data and ideally adjusts the gas injection parameters to different working conditions and engine load. Because of that, the controller is able to apply constant long term and short term corrections and ensure very precise fuel dosage.

The correct fuel dosage is not calculated only by the fuel injection time as it is usually done by other controlling devices. The controller spontaneously adjusts the injection to the correction signal generated by the petrol ECU during driving.

FEMITEC MA-V4 OBD is produced using the plug’n'drive and user friendly technologies. It makes the easy installation and calibration.
After installation and auto-calibration, the controller gathers the data and adjusts itself during normal usage, to the driving conditions. It guaranties the optimal engine working range with accordance to the petrol parameters set by the auto manufacturer.
The controller is especially recommended in new vehicles equipped with modern engines (not direct injection) and up to 8 cylinders as well as vehicles with large engine capacity and heavily used. Even vehicles with turbocharger will not be problematic. The EUROPE/BOSCH type connection, makes it easy to install in any type of vehicles.
FEMITEC MA-V4 OBD controller is recommended for heavily used vehicles including camper and boat hauling and long distance international travel.
The controller guarantees smooth and dynamic engine performance in the full range of the parameters set by the vehicles manufacturer. The tests done on the vehicles with the Femitec system, did not show any negative impact on any mechanical parts and electronic equipment of the engine.

Housing:

  • Integrated sequential petrol injection emulator.

The Features:

  • Maintains the key engine performance parameters: power and torque at the level identical with the petrol performance
  • Direct connection with the vehicles OBD.
  • Constant communication with the vehicles OBD and gas system OBD allows easy connections of testers and diagnostic equipment.
  • Minimal risk of errors associated with the hand calibration.
  • Sound reminder of the upcoming service date.
  • The RPM detection through camshaft.
  • Undetectable petrol to gas switchover.
  • Recommended for the turbo charged engines.
  • Automatic switchover to petrol on an empty gas tank.

Installation and calibration:

  • After the initial calibration during installation, The FEMITEC MA-V4 OBD adjust itself in real time, during normal vehicle usage. It guarantees that when the vehicle is powered by LPG or CNG, the optimal engine working range with accordance to the petrol parameters set by the auto manufacturer.
  • The controller is produced using the plug’n'drive and user friendly technologies. It makes the easy installation and calibration.
  • Separate adaptation for BANK 1 and BANK 2 (the option to set the injectors belonging to BANK 1 and to BANK 2).
  • Adaptation parameters displayed, petrol / gas, without additional equipment.
  • Read out and deletion of errors without the additional equipment..
  • Euro 5 emission norms fulfillment.

 INJECTORJI Barracuda

Za 4 cilindre skupno

 

TECHNICAL SPECIFICATION

Max flow rate at 1,2 bar [Nl/min] 115 ±1
Nozzle size [mm] max 2,8
Coil resistance [Ω] 1,9 ±5%
Opening time [ms] ˞1,9
Closing time [ms] ˞1,2
Max peak current [A] 4
Max hold current [A] 2
Operating working pressure [bar] 0,2 ÷ 4,2
Max working pressure [bar] 4,5
Operating temperature [°C] -20 ÷ 120
Operating voltage range [V DC] 6 ÷ 18
Warranty [km] 100 000
Life-span of stroke > 500 mln of cycles
Connector SuperSeal
Homologation E8 67R-01 6407 ; E8 110R-00 6408

 

 

REDUKTORJI 

PALACAR  is the leader in automotive LPG market.  Company Is engaged in production and sales of professional LPG industry. The Certificate of Quality Management ISO 9001:2000 and approval of the Minister of Infrastructure to adapt cars to LPG gas confirms  many years of experience in the industry.

KR1 – vacuum gas reducer for LPG mix systems up to 150 PS Supported motor powers: 150 PS Diameter of gas supply pipe: Ø 6 Diameter of output  gas connector: Ø 19  Diameter of water connector: Ø 16 Coil resistance: 3,5Ω Coil power: 40W Dimension: 170/200/72 mm Weight: 1,60kg. Body: injection molding technology
3 letna tovarniška garancija .
Moč od 150 – 400 hp.

 

KR4 gas reducer with integrated shut-off valve for LPG injection systems up to 150PS
Supported motor powers: up to 150PS
Operating pressure: 0,8– 2,0 BAR
Overpressure valve: 3,5 BAR
Diameter of gas supply pipe: Ø 6
Diameter of output gas connector: Ø 12
Diameter of water connectors: Ø 16
Gas filter: integrated
Shut-off valve: integrated
Coil resistance: 10Ω
Coil power: 21W
Dimension: 200/140/75 mm
Weight: 1,30kg
Body: injection molding technology

TURBO KR3 – gas reducer for LPG injection systems for super-charged engines up to 400PS
Supported motor powers: up to 400PS
Operating pressure: 0,8 – 2,0 BAR
Overpressure valve: 3,5 BAR
Diameter of gas supply pipe: Ø 8
Diameter of output gas connector: Ø 16
Diameter of water connector: Ø 16
Dimension:190/190/95 mm
Weight: 1,70kg
Body: injection molding technology